One For All Remote Codes: How to Program Any Device
There’s a moment of truth when you pick up a new universal remote and hope it will actually work with your TV. If you’ve ever spent an evening cycling through code after code with no luck, you already know the pain this guide is here to fix. We’ll walk through the two reliable ways to program a One For All remote—manual code entry and auto-search—using the official code tools and manufacturer lists that remove the guesswork. By the end, you’ll have a clear route to pairing your remote, even if you’ve lost the original code sheet.
Devices controlled by One For All remotes: Up to 12 ·
Supported brands: Over 1,000 ·
Code lengths: 3-digit and 4-digit codes ·
Number of One For All remote models: 40+
Quick snapshot
- Use 4-digit or 3-digit code from the official One For All Support FAQ
- Press and hold device key until LED lights (One For All Support FAQ)
- Enter code; LED turns off if accepted (One For All Support FAQ)
- Press device + OK buttons (One For All Universal Remotes Support)
- Remote cycles through codes (One For All Universal Remotes Support)
- Stop when TV turns off (One For All Universal Remotes Support)
- One For All website code finder (One For All Code List PDF)
- Downloadable PDF code list (One For All Code List PDF)
- Enter brand and model for exact code (One For All Code List PDF)
- Replace batteries if LED dim
- Try alternate codes for the same brand
- Check for device-specific infrared location
How do I program my One For All universal remote?
Locating the code for your device
- Check the battery compartment or the back of your original remote for a printed code sticker (One For All Universal Remotes Support).
- Look in the TV’s manual or the original packaging for a code list.
- Visit the official One For All ‘Find your setup code’ tool and enter the exact make and model number of your device.
- Download the One For All PDF code list, organized by device type (TV, DVD, etc.).
Five seconds of hunting for that sticker or typing your model into the official tool can save you ten minutes of random code punching. The One For All code database covers over 1,000 brands, but the right code is often just one of four or five per brand.
Entering the 4-digit code
- Turn on the device you want to control manually.
- Press and hold the Setup button on the One For All remote until the LED blinks once and then twice (One For All Support FAQ).
- Press the device key (TV, DVD, etc.) once. The LED will blink once.
- Enter the 4-digit code from your lookup.
- The LED will turn off and stay solid if the code was accepted, or it will flash a different pattern if it wasn’t.
For the OFA 8 URC2981 model, the direct-code sequence works exactly the same way: press the device key, hold Setup until the LED blinks once and then twice, then enter the code (URC Support (OFA 8 URC2981)).
Testing the remote functions
- Point the remote at the TV and press Power. If the TV turns off, the code works.
- Test Volume Up/Down and Mute to confirm full control.
- If some buttons don’t work, you may need a different code from the same brand list.
One For All remotes contain multiple software versions, and each version stores a different set of codes in memory. According to URC Support (OFA 8 URC2981), that means a code that works on one remote model might not work on another—even for the same brand—because the underlying code library differs by firmware version.
The pattern: One For All gives you about four or five codes per brand, but only one will control all functions. Testing volume and power right after entry tells you if you’ve found the right one or if you need to try the next code in the list.
How to pair a One For All remote to a TV without a code?
Using the auto-code search feature
- Turn on your TV manually.
- Press and hold the device button (e.g., TV) and the OK button simultaneously until the LED blinks twice (One For All Universal Remotes Support).
- Point the remote at your TV.
- Press the POWER button repeatedly—once every second—until the TV turns off.
- Once the TV turns off, press OK to lock in the code.
The remote is cycling through its internal database of codes, one at a time. When the TV shuts off, it means you’ve hit the right code. This method works on any One For All remote that supports auto-search, including the Simple remote series.
Troubleshooting if auto-search fails
- If the TV never turns off after cycling through all codes, try holding the device button and the OK button three seconds longer until the LED blinks twice.
- Replace batteries—if the LED is dim during the sequence, the signal may be too weak to reach the TV.
- Some older or uncommon TV brands may not be in the auto-search library. In that case, look up the code manually using the One For All Code List PDF.
Alternative: brand code search
If the generic auto-search doesn’t work, One For All remotes often have a brand-specific quick-search mode. For the Simple remote, the fallback sequence is: hold Setup until the LED blinks twice, enter 992, press the device key twice, then set up the device code (One For All Support FAQ).
The catch: auto-search is the fastest method when you’ve lost the code sheet, but it can take up to 20 seconds of pressing POWER repeatedly. If you’re in a room with a sleeping child or a shared living area, manual entry with a known code is quieter and faster.
Auto-search is the default recovery method when no code is available, but it works best on modern TVs with strong infrared sensors. For an older set with a weak receiver, manual code entry from the official list is the more reliable path.
How do I find my One For All remote code?
Using the One For All code list PDF
One For All publishes a comprehensive code list PDF on its website. The One For All Code List PDF is organized by device type (TV, DVD, soundbar, etc.) and then by brand. Each brand has a small table of 3-digit and 4-digit codes.
For example, Samsung TVs typically have codes starting with 0 or 1, such as 0060, 0101, or 0065. You’ll need to try each one until you find the code that controls your specific model.
The implication: using the PDF means you have the full brand list at your fingertips, but you may still need to test multiple codes before finding the match for your exact model.
Using the online setup code tool
One For All’s official ‘Find your setup code’ tool allows you to search by brand and model number. Go to the One For All support FAQ page and click the link to the tool. Enter the exact make and model number of your device, and the tool returns the precise 4-digit code.
The tool also works for soundbars, streaming devices, and other home theater components—not just TVs. This is the most reliable way to get the exact code without needing to download a PDF.
Checking the remote’s manual
Every One For All remote ships with a printed code list in the manual. If you’ve kept the original packaging, the code sheet is usually tucked inside the battery compartment or printed on a separate card. The One For All Universal Remotes Support page also provides model-specific documentation for over 40 remote models.
Where can I find the right code for my device?
Using the One For All ‘Find your setup code’ tool
Head to One For All’s support FAQ and select your region. The ‘Find your setup code’ tool is the primary code lookup method recommended by One For All themselves. Input your device brand and the full model number (e.g., UE43AU7172) for the most accurate result.
Searching by brand and model number
- Visit the tool page and select your device category (TV, DVD, etc.).
- Type the brand name and model number exactly as printed on the back of the device.
- The tool returns a single 4-digit code. If that code doesn’t work, the tool also suggests alternate codes to try.
Cross-referencing with the code list PDF
Once you have a candidate code from the online tool, cross-check it with the One For All Code List PDF. This PDF shows all codes for a given brand, so you can see if there are multiple valid codes and try the next one if the first fails.
The pattern: the online tool and the PDF list come from the same One For All database, but the tool is more precise because it pinpoints your model. Use the tool first, then fall back to the PDF for alternate codes if the first one doesn’t work.
How do I connect my One For All universal remote to my TV?
Power on the TV
Before you start programming, ensure your TV is turned on and the remote has fresh batteries. One For All recommends 2 x AAA alkaline batteries for most models. If the LED on the remote is dim, replace the batteries before starting—an underpowered remote won’t send a clear infrared signal (One For All Universal Remotes Support).
Enter the code or use auto-search
You now have two options: manual code entry (use the code from the official tool or PDF) or auto-search (no code needed). Both methods are covered in detail in the sections above. The critical step: during code entry, point the remote directly at the TV’s infrared sensor—usually a small dark window on the front of the TV or near the power button.
Verify volume and channel control
After the code is accepted, test operation by pressing Volume Up and Channel Up. If both work, your programming is complete. If not, the code may control only Power but not other functions. Try a different code from the same brand list or repeat the auto-search.
Manual code entry gives you instant control if you have the right code, but auto-search is your fallback if your device is a less common brand. For Samsung and LG TVs, which together account for roughly half of the global TV market, manual entry from the brand code list is nearly always faster than auto-search.
How do I find my TV code for a universal remote?
Checking the TV’s original remote
Look at the back or inside the battery compartment of the original remote that came with your TV. Many manufacturers print the universal code for their brand right there. For Samsung, you might see a sticker labeled “RC code” followed by digits. For LG, codes are often printed on the bottom of the remote (One For All Universal Remotes Support).
Looking for a code sticker on the TV
Some TV models have a small sticker on the back or side panel listing the universal remote code. This is more common on older sets (pre-2015) but still worth a check. The sticker usually says “Code:” followed by a 3- or 4-digit number.
Using the TV brand code list
If you don’t have access to the original remote or TV sticker, use the One For All brand code list. Most brands have between 1 and 5 universal codes. The One For All Code List PDF groups them by brand, so you can try each one sequentially. Common Samsung codes: 0060, 0101, 0065. Common LG codes: 0060, 0063, 0178.
The fastest path is checking the original remote first—it takes 10 seconds. The second-fastest is the brand code list from One For All’s PDF. Only use the online tool if neither of those works.
Getting the wrong code isn’t just a minor inconvenience—it means the remote may turn your TV on and off but fail to control volume or switch inputs. A partial pairing is worse than no pairing because you might assume it’s fully functional until you actually need to mute an ad or switch to a game console.
“If you are looking for your setup code, click here to open our Find your setup code tool and enter the exact make and model number of your device.”
– One For All Support FAQ
“There are multiple versions of the software in this One For All remote, and each version contains different codes in the memory.”
For a complete reference of programming codes, the One For All remote codes guide offers step-by-step instructions for any device.
Frequently asked questions
What do I do if the code I found doesn’t work?
First, double-check the code by entering it again. If it still fails, try an alternate code from the same brand’s list in the One For All Code List PDF. Some brands have up to 5 codes, and only one will control all functions. If none work, use the auto-search method to find the code automatically.
Can I use the same One For All remote for multiple TVs?
Yes. One For All remotes can control up to 12 different devices. You’ll assign each device to a separate button (TV, DVD, AUX, etc.). Just repeat the programming process for each device using its own code.
How do I program a One For All remote for a soundbar?
Use the AUDIO or AMP device button instead of TV. Follow the same manual code entry or auto-search steps. Soundbar codes are grouped separately in the One For All Code List PDF under the ‘AUDIO’ device category.
Why is my One For All remote not responding after programming?
Replace the batteries first. If the LED is dim, the remote won’t send a strong enough signal. If the LED doesn’t light at all, you may have accidentally locked the remote. Try resetting it by holding Setup until the LED blinks once and then twice, then entering code 981 (URC Support (OFA 8 URC2981)).
How do I reset my One For All remote to factory settings?
Press and hold Setup until the LED blinks once and then twice. Enter 981. The LED will blink four times to confirm the reset (URC Support (OFA 8 URC2981)). This clears all programmed codes and returns the remote to its default state.
Are One For All remotes compatible with Roku or Fire TV?
Yes, if your Roku or Fire TV has an infrared receiver (most models do). Use the device code for streaming players in the One For All Code List PDF under the ‘STREAM’ or ‘AUX’ category. Roku and Fire TV also support IR-over-HDMI CEC, but a universal remote works best with direct line-of-sight control.
How do I program a One For All remote for a Samsung TV specifically?
Common One For All codes for Samsung TVs are 0060, 0101, 0065, and 0215. Use the manual code entry method: press Setup until the LED blinks twice, press TV, and enter one of these codes. Test Power and Volume. If it doesn’t work, try the next code or use the One For All setup code tool with your exact model number.
What’s the difference between a 3-digit and 4-digit code?
One For All remotes use both 3-digit and 4-digit codes depending on the model and device. Newer remotes generally use 4-digit codes, while some older models use 3-digit. The One For All Code List PDF lists both formats. Use the version that matches your remote—if you enter a 3-digit code on a remote that expects 4-digit, the LED won’t confirm.
For anyone with an older TV or an obscure brand, the safest move is to try auto-search first, then manual entry with the official code list. The URC Support (OFA 8 URC2981) page notes that different remote versions contain different code libraries, so if one remote can’t find your device, a different One For All model might. For the vast majority of users with a Samsung, LG, or Sony TV from the last ten years, the choice is clear: use the online tool, punch in the 4-digit code, and you’re done in under a minute.
More related posts
